6.24.6 DC Dimmer Command 2
Fri, 2025-08-08 17:09 — RV-C Admin
Justification:
To add clarity around Max allowed value and how to request no (0) delay.
| Attachment | Size |
|---|---|
| 6.24.6 DC Dimmer Command 2 - 7Aug2025.docx | 25.96 KB |
Clayton, are your comments
Clayton, are your comments an Objection to the submission or just comments? Please clarify.
I am not making an objection,
I am not making an objection, just a comment. I disagree with the intended use of delay command with a value of 0, but I don't disagree that this is how a controller should respond if it was to receive this command.
The addition about using
The addition about using delay commands with a value of 0 appears to be unjustified. Proper usage would be to not use a delay command if a delay isn't required.
In general I agree, but I
In general I agree, but I believe it should be specified as what a 0 means because someone is going to do this.
It seems reasonable that a
It seems reasonable that a delay of 0 would mean no delay, so I am not necessarily opposed to adding in a note clarifying this, but at that point there should also be a note indicating that if you do want to use a delay of 0, you should choose a more appropriate command.